specification control drawing te connectivity 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: sealing sleeve unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: d-436-0096/-0098 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 4 date: 16-apr-11 prepared by: mforonda dcr number: d050379 replaces: d981035 cage code : 06090 scale: --- size: a sheet: 1 of 1 print date: 9-may-11 ? 2011 tyco electronics corporation, a te connectiv ity ltd. company. all rights reserved. if this document is printed it becomes uncontrolled . check for the latest revision. materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. sealing rings: immersion resistant thermoplastic . color: one clear, one color coded (see table). application 1. these parts are designed to provide an immersion resistant seal on 1 to 1 splices made of wires hav ing an insulation rated for at least +135 ? c. 2. temperature range: -55 ? c to +150 ? c. 3. parts may be installed by convection heating. wire dimension: product dimensions wire dimensions ?d product name prod. rev. l max e min ?a min min max color d-436-0096 q 29.2 (1.150) 24.15 (0.950) 2.16 (0.085) 0.63 (0.025) 2.16 (0.085) red d-436-0097 s 29.2 (1.150) 24.15 (0.950) 2.80 (0.110) 0.63 (0.025) 2.80 (0.110) blue d-436-0098 d 29.2 (1.150) 24.15 (0.950) 4.32 (0.170) 0.63 (0.025) 4.32 (0.170) yellow
|
